126 lines
3.4 KiB
Markdown
126 lines
3.4 KiB
Markdown
# Step by step setup guide for pi zero w & uv4l
|
|
|
|
# Image
|
|
|
|
Download the last stretch image from here:
|
|
|
|
```
|
|
http://ftp.jaist.ac.jp/pub/raspberrypi/raspbian_lite/images/raspbian_lite-2019-04-09/2019-04-08-raspbian-stretch-lite.zip
|
|
```
|
|
|
|
And install it on your pi with a program like [Etcher](https://www.balena.io/etcher/)
|
|
|
|
# Networking & SSH
|
|
|
|
Once it's flashed, open the partition that appears and create two new files:
|
|
|
|
* ssh (blank)
|
|
* wpa_supplicant.conf
|
|
|
|
The file _ssh_ can be blank, but the contents of wpa_supplicant.conf should look as follows:
|
|
|
|
```
|
|
country=UK
|
|
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
|
|
update_config=1
|
|
|
|
network={
|
|
ssid="WIFI_SSID"
|
|
scan_ssid=1
|
|
psk="WIFI_PASSWORD"
|
|
key_mgmt=WPA-PSK
|
|
}
|
|
```
|
|
|
|
# Change the password
|
|
Just do eet:
|
|
|
|
```bash
|
|
pi@raspberrypi:~ passwd
|
|
```
|
|
|
|
# raspi-config
|
|
|
|
First, set up the camera, the RAM split and expand the disk with the rpi-config command:
|
|
|
|
```bash
|
|
pi@raspberrypi:~ $ sudo raspi-config
|
|
```
|
|
|
|
First set up camera with option 5:
|
|
|
|
|
|
|
|
Then choose P1 Camera:
|
|
|
|
|
|
|
|
Then go back to the main screen and choose option 7:
|
|
|
|
|
|
|
|
First Expand Filesystem A1:
|
|
|
|
|
|
|
|
Then return to option 7 again and choose A3 memory split:
|
|
|
|
|
|
|
|
Set this to __128mb__ and then exit raspi-config. When prompted to restart, select yes - this is to ensure the disk is resized before we updated.
|
|
|
|
# Update the system
|
|
|
|
First install screen, so that you don't have to worry about a disconnect mid update:
|
|
|
|
```bash
|
|
pi@raspberrypi:~ $ sudo apt update && sudo apt install screen -y
|
|
```
|
|
|
|
Then start screen and update:
|
|
|
|
```bash
|
|
pi@raspberrypi:~ $ screen
|
|
pi@raspberrypi:~ $ sudo apt upgrade -y
|
|
```
|
|
This will take some time...
|
|
|
|
|
|
|
|
|
|
# UV4L Packages
|
|
|
|
Once updates are complete install uv4l packages.
|
|
|
|
First, install the gpg key for the repo, so the pi trusts it:
|
|
|
|
```bash
|
|
pi@raspberrypi:~ $ curl http://www.linux-projects.org/listing/uv4l_repo/lpkey.asc | sudo apt-key add -
|
|
% Total % Received % Xferd Average Speed Time Time Time Current
|
|
Dload Upload Total Spent Left Speed
|
|
100 26703 100 26703 0 0 116k 0 --:--:-- --:--:-- --:--:-- 116k
|
|
OK
|
|
```
|
|
|
|
Then add the repository to apt sources and use the _cat_ command to check the contents of the file after to confirm:
|
|
```bash
|
|
pi@raspberrypi:~ $ echo -e "\ndeb http://www.linux-projects.org/listing/uv4l_repo/raspbian/stretch stretch main" | sudo tee -a /etc/apt/sources.list
|
|
|
|
deb http://www.linux-projects.org/listing/uv4l_repo/raspbian/stretch stretch main
|
|
pi@raspberrypi:~ $ cat /etc/apt/sources.list
|
|
deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
|
|
# Uncomment line below then 'apt-get update' to enable 'apt-get source'
|
|
#deb-src http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
|
|
|
|
deb http://www.linux-projects.org/listing/uv4l_repo/raspbian/stretch stretch main
|
|
pi@raspberrypi:~ $
|
|
```
|
|
|
|
```bash
|
|
pi@raspberrypi:~ $ sudo apt install uv4l uv4l-raspicam uv4l-raspicam-extras
|
|
```
|
|
|
|
```bash
|
|
pi@raspberrypi:~ $ sudo reboot
|
|
```
|